Product Line
PE Plastic Rack Cases (U Series)
Molded polyethylene 19-inch rack cases built for amplifiers, processors, recorders and rack systems — from a 2U amplifier to a full 16U rack. One-piece waterproof shells, steel mounting rails and stackable geometry, produced factory-direct in Guangzhou.
Three Series, Every Rack Height Covered
The U series is named for rack units (U) and case depth. Together the three families cover the full range of 19-inch equipment transport:
| Model | Inner dimensions (W×D×H) | Outer dimensions (W×D×H) | Weight |
|---|---|---|---|
| 260C-2U | 490 × 260 × 92 mm | 570 × 390 × 170 mm | 5.2 kg |
| 260C-3U | 490 × 260 × 138 mm | 570 × 390 × 210 mm | 5.6 kg |
| 260C-4U | 490 × 260 × 183 mm | 570 × 390 × 260 mm | 6.2 kg |
| 260C-6U | 490 × 260 × 273 mm | 570 × 390 × 320 mm | 7.1 kg |
| 390C-2U | 490 × 390 × 92 mm | 570 × 520 × 170 mm | 5.9 kg |
| 390C-3U | 490 × 390 × 138 mm | 570 × 520 × 210 mm | 6.2 kg |
| 390C-4U | 490 × 390 × 183 mm | 570 × 520 × 260 mm | 7.0 kg |
| 390C-6U | 490 × 390 × 273 mm | 570 × 520 × 320 mm | 8.0 kg |
| 525C-8U | 500 × 525 × 360 mm | 550 × 655 × 467 mm | 18.5 kg |
| 525C-12U | 500 × 525 × 540 mm | 550 × 655 × 700 mm | 19.8 kg |
| 525C-14U | 500 × 525 × 630 mm | 550 × 655 × 790 mm | 21.0 kg |
| 525C-16U | 500 × 525 × 720 mm | 550 × 655 × 880 mm | 22.5 kg |
Options across all three series: telescoping pull rod (260 / 390 series) and a wheel pallet under the 525U deep racks for rolling full builds. Send us your rack layout and we will match the series and height — single replacement cases and full fleet orders are both welcome.
Construction
| Shell | One-piece molded PE (polyethylene) — no joints, no laminate, waterproof |
|---|---|
| Rails | Steel 19-inch mounting rails fitted front and rear on request |
| Hardware | Butterfly twist latches, recessed handles, stacking geometry |
| Interior | Optional CNC-cut foam or open rack configuration |
| Colors | Black standard; custom colors and logo branding for OEM orders |
Why Buyers Choose PE Rack Cases
Rack cases see the hardest duty cycle in any rental fleet — loaded, stacked and rolled daily. Molded PE handles that cycle without the failure modes of plywood: no peeling laminate, no crushed corners, no water ingress at seams. The shell flexes under impact and recovers, keeping your rack protected season after season. For deep-dive comparison, see our FAQ below.
PE Rack Case FAQ
What rack heights are available in the PE rack case series?
The 260 and 390 series are available in 2U, 3U, 4U and 6U heights, and the 525U series covers 8U, 12U, 14U and 16U — all with 19-inch rack mounting rails.
Are the PE rack cases stackable?
Yes. The molded shell geometry and recessed hardware let cases stack securely in truck packs and storage rooms without slipping.
Can you fit a case to my exact amplifier model?
Yes — foam interiors can be CNC-cut to your equipment, and rear panel cutouts for connectors and ventilation are configured on request. See the 260 series detail page for a full construction breakdown.
Racking Up Amplifiers or Processors?
Send your rack list — 2U to 16U, factory-direct within 15 days.
Get a Quote